Asus Motherboard NCLV-D2 Series - Manual (Page 110)

5 - 8 5 - 8 5 - 8 5 - 8 5 - 8 C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n
6. Select R A I D R A I D R A I D R A I D R A I D from the L o g i c a l D r i v e L o g i c a l D r i v e L o g i c a l D r i v e L o g i c a l D r i v e L o g i c a l D r i v e menu, then press <Enter>.
7. Select the RAID level from the menu, then press <Enter>.
You need at least two identical hard disk drives when creating a RAID 1 set.
8. When creating a RAID 1 set, select S t r i p e S i z e S t r i p e S i z e S t r i p e S i z e S t r i p e S i z e S t r i p e S i z e from the L o g i c a l L o g i c a l L o g i c a l L o g i c a l L o g i c a l
D r i v e D r i v e D r i v e D r i v e D r i v e menu, then press <Enter>.
When creating a RAID 0 set, proceed to step 10.
9. Key-in the stripe size, then press <Enter>.
For server systems, we recommend that you use a lower array block size.
For multimedia computer systems used mainly for audio and video editing,
we recommend a higher array block size for optimum performance.