Asus Motherboard NCLV-D2 Series - Manual (Page 85)

A S U S N C L V - D 2 S e r i e s A S U S N C L V - D 2 S e r i e s A S U S N C L V - D 2 S e r i e s A S U S N C L V - D 2 S e r i e s A S U S N C L V - D 2 S e r i e s 4 - 2 3 4 - 2 3 4 - 2 3 4 - 2 3 4 - 2 3
PCI IDE BusMaster [Enabled] PCI IDE BusMaster [Enabled] PCI IDE BusMaster [Enabled] PCI IDE BusMaster [Enabled] PCI IDE BusMaster [Enabled]
Allows BIOS to use PCI bus mastering when reading/writing to IDE devices.
Configuration options: [Disabled] [Enabled]
IRQ-xx assigned to [PCI Device] IRQ-xx assigned to [PCI Device] IRQ-xx assigned to [PCI Device] IRQ-xx assigned to [PCI Device] IRQ-xx assigned to [PCI Device]
When set to [PCI Device], the specific IRQ is free for use of PCI/PnP
devices. When set to [Reserved], the IRQ is reserved for legacy devices.
Configuration options: [PCI Device] [Reserved]
4.4.4 4.4.4 4.4.4 4.4.4 4.4.4 Power Configuration Power Configuration Power Configuration Power Configuration Power Configuration
The Power Configuration menu items allow you to change the settings for
the ACPI and Advanced Power Management (APM) features. Select an item
then press <Enter> to display the configuration options.
ACPI APIC Support [Enabled] ACPI APIC Support [Enabled] ACPI APIC Support [Enabled] ACPI APIC Support [Enabled] ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power
Interface (ACPI) support in the Application-Specific Integrated Circuit
(ASIC). When set to Enabled, the ACPI APIC table pointer is included in the
RSDT pointer list. Configuration options: [Disabled] [Enabled]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
Include ACPI APIC
table pointer to RSDT
pointer list.
IMPORTANT!!!
Do not change the APIC
support settings after
OS installation;
otherwise, a system
boot failure may
occur.
Power Configuration
ACPI APIC Support [Enabled]
APM Configuration