HP Matrix Operating Environment Software User Manual
Page 72
6.
Select the user in the Unassigned Users/Groups list and then click >>. Repeat this process for
each user. Click Save. The Servers page reappears.
To verify that the users are assigned to the pool, select the pool. A list of the assigned users
and groups appears at the bottom of the screen.
Verifying infrastructure orchestration users and groups
The Users tab contains a list of all users and groups authorized to use infrastructure orchestration.
If the users that you expect are not listed, return to “
Configuring infrastructure orchestration users
” and verify that every user and group to be granted infrastructure orchestration access
is a member of the appropriate user group in Windows: HPIO_Administrators, HPIO_Architects,
HPIO_Users. No settings can be modified on this tab.
Configuring infrastructure orchestration to list heterogeneous hardware
To integrate with non-HP based servers or HP rack mount servers, HP recommends the use of the
ESA (Extensible Server Adapter) bundled with HP Matrix Operating Environment for use with the
logical server capabilities of Matrix OE visualization. ESA includes integration with the Matrix OE
embedded Operations Orchestration engine, and enables the definition and execution of workflows
for loading server inventory and for performing basic power control.
See the HP Matrix Operating Environment Logical Server Management User Guide at
for more information about using ESA in Matrix OE.
Several server types and configurations may integrate into infrastructure orchestration using ESA
in Matrix OE.
•
HP rack mount servers
•
HP c-Class blades (not managed by Virtual Connect)
For each of the server types referenced above, the following storage configurations are supported:
Boot Disk
•
A SAN (Fibre Channel) attached disk
•
A local (direct attached) disk. If using an on-board RAID controller, only a single logical volume
is supported.
Data Disk(s)
•
One or more SAN (Fibre Channel) attached disks
The included reference workflow for controlling server power supports the following server
management processors:
•
ProLiant iLO2
•
Integrity iLO2
72
Installation and configuration