HP StoreAll Storage - Manual (Page 204)

NOTE: For SMB users setting the access time manually for a file, the maximum retention period
is 100 years from the date the file was retained. For NFS users setting the access time manually
for a file, the retention expiration date must be before February 5, 2106.
The access time has the following effect on the retention period:
•
If the access time is set to a future date, the retention period of the file is set so that retention
expires at that date.
•
If the access time is not set, the file inherits the default retention period for the file system.
Retention expires at that period in the future, starting from the time the file is set read-only.
•
If the access time is not set and the default retention period is zero, the file will become WORM
but not retained, and can be deleted.
You can change the retention period if necessary; see “Changing a retention period” (page 206) .
Viewing the retention information for a file
To view the retention information for a file, run the following command:
ibrix_reten_adm -l -f FSNAME -P PATHLIST
For example:
# ibrix_reten_adm -l -f sales_fs -P /sales_fs/dir1/contacts.txt
nl
/sales_fs/dir1/contacts.txt: state={retained} retain-to:{2011-Nov-10
15:55:06} [period: 182d15h (15778800s)]
In this example, contacts.txt is a retained file, its retention period expires on November 10,
2011, and the length of the retention period is 182 days, 15 hours. The period displayed by the
ibrix_reten_adm
command shows the length of the retention period from when retention was
first applied to the file. If a file expires from retention, and you later re-retain a file to a new future
date, the period is the total length of time from the first retention.
File administration
To administer files from the Management Console, select File Administration on the WORM/Data
Retention panel. Select the action you want to perform on the WORM/Data Retention – File
Administration dialog box.
204 Managing data retention