HP 9000 Virtual Library System - Manual (Page 204)

Status Description Item
Used to reset the switch while it is turned on. This action clears any temporary error
conditions that may have occurred and executes the switch self-test. Reset button 9
When pressed with the Clear button in a specific pattern, any configuration changes
you may have made through the switch console, the Web browser interface, and
SNMP management are removed, and the factory default configuration is restored
to the switch.
Blinking blue = Locate function is active. Firmware controlled, can be set to on or
blinking. Locator LED 10
Off = Locate function is disabled.
USB LAN Adapter Components
This section provides an image and description of the USB LAN adapter.
Description Item
USB LAN adapter 1
LAN cable 2
USB cable 3
VLS9000 Disk Array Components, LEDs, and Buttons
This section provides images and descriptions of the front and rear panels of the VLS9000 disk
array enclosures.
Front Panel Components
Description Item
Drives 0, 1, and 2
(numbered from top to bottom) 1
Drives 3, 4, and 5 2
204 Component Identification