HP 9000 Virtual Library System - Manual (Page 252)

Specification Item
Access methods • In-band
•
Ethernet 10/100 BaseT with RJ45
• RS-232 serial port with DB9
Diagnostics •
Power-up self-test of all functionality except media modules
• Field-selectable full self-test including media modules
Fabric services •
Simple name server
• Fabric zoning
◦
Hardware-based - Access Control List (port)
◦
Name Server (WWN)
◦
Orphan Zoning
◦
All zoning assigned on per-node basis, even across Multi-stage
fabrics
• Registered State Change Notification (RSCN)
•
I/O StreamGuard™
• Multi-chassis in-order delivery
•
Automatic path selection in Multi-stage configurations
•
FDMI device support
100/240 VAC Voltage
1.0 A at 100-120 VAC; 0.5 A at 200-240 VAC Current
100W maximum (with full-optics configuration) Power
50/60 Hz Frequency
Ethernet Switch 2510–24 Specifications
Specification Item
9.3 x 17.42 x 1.73 in. (23.62 x 44.25 x 4.39 cm) 1U height Dimensions
4.9 lb (2.2 kg) fully loaded Weight
24 RJ-45 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type
100Base-TX); 1 RJ—45 serial console port; 2 dual-personality ports, Ports
each of which can be used as either an RJ-45 10/100/1000 port or
an open mini-GBIC slot (for use with mini-GBIC transceivers)
MIPS, 264 MHz Processor
8 MB Flash capacity
64 MB RAM/ROM capacity
384 KB Packet buffer size
< 4.9 µs (64-byte packets) Latency (100 Mb)
< 2.6 µs (64-byte packets) Latency (1000 Mb)
6.5 million pps (64-byte packets) Throughput
8.8 Gbps Switching capacity
8000 entries MAC address table size
252 Specifications