HP Brocade 8Gb SAN Switch for HP BladeSystem c-Class - Manual (Page 51)

C SAN Switch technical specifications
This appendix provides the following information:
• General specifications , page 51
• Weight and physical dimensions , page 52
• Environmental requirements , page 53
• Supported SFPs , page 53
• Supported HBAs , page 53
General specifications
Table 18 lists general specifications for the 8Gb SAN Switch for HP BladeSystem c-Class.
Table 18 General specifications
Description Specification
F_Port, FL_Port, and E_Port Configurable port types
Small Form-Factor Pluggable (SFP) laser. 1/2/4/8Gb short
wave up to 500 m (1,640 ft.) and 1/2/4/8Gb long wave
up to 10 km
Note: 4Gb SFPs support 1/2/4 Gbps, and the 8Gb SFPs
support 2/4/8 Gbps.
Media types
An operating SAN Switch conforms to the emissions
requirements specified by the following regulations:
• FCC Rules and Regulations, Part 15 subpart B, Class A
• CSA C108.8 Class A
• VCCI Class A ITE
• CISPR 22 Class A
• EN55022 Class A
• AS/NZF 3548: 1995 Class A
• CNS13438 Class A
• ICES-003 Class A
• Korean EMC Requirements
• BSMI Standard CNS 13438
• EMC Directive 89/336/EEC
• EN5022 Level A
• EN50082-2/EN55024: 1998
EMC emissions
Brocade 8Gb SAN Switch for HP BladeSystem c-Class 51