2 client upgrades – HP StorageWorks Scalable File Share User Manual
Page 35
10.
Edit the newly created cib.xml files for each failover pair and increase the value of
epoch_admin to be 1 larger than the value listed in the active cib.xml.
11.
Install the new cib.xml file using the following command:
# cibadmin -R -x
<new cib.xml file>
12.
Run the crm_mon utility on both nodes of the failover pair and verify that no errors are
reported.
13.
Verify that the file system is operating properly.
14.
Repeat the process with the other member of the failover pair.
15.
After both members of a failover pair are upgraded, repeat the procedure on the next failover
pair until all failover pairs are upgraded.
3.6.2 Client Upgrades
After all the file system servers are upgraded, clients can be upgraded if applicable. This procedure
depends on the types of clients and client management software present on the clients. In general,
unmount the file system on a client. Upgrade the software using the client installation information
in
, with specific instructions for this upgrade. Reboot as necessary. Remount
the file system and verify that the system is operating properly.
3.6 Upgrade Installation
35