HP Command View EVA Software - Manual (Page 17)

NOTE: When you configure an FC application server in the VMDirectPath configuration,
the HP MPIO DSM Manager software version is not detected after the initial installation. If
you reconfigure the FC application server, HP P6000 SmartStart attempts to reinstall the HP
MPIO DSM software. Since HP MPIO DSM Manager software is already installed, the
installation may fail. You can ignore the failed installation of the HP MPIO DSM software and
continue with the HP P6000 SmartStart installation.
•
If VMDirectPath is available, the fcinfo tool must be installed for HP P6000 SmartStart to
discover the HBA. You can install fcinfo from the P6000 SmartStart DVD (/bin/
installers/fcinfo
) by running the fcinfo package for your computer architecture.
•
If you have another instance of HP P6000 Command View that is not running on a VMware
Windows guest OS, you can access that instance with HP P6000 SmartStart to use both the
Fibre Channel and iSCSI application server features.
HP P6000 SmartStart CD for Linux
•
Use of the CD for Linux with a VMware guest OS is not supported.
Viewing the log
HP P6000 SmartStart maintains a log with information about the operation of the application. To
view the log, select File
→Log File→Open log. Select the Clear log option to clear the log.
Viewing the log 17