Vaisala PTB330 - Manual (Page 24)

USER'S GUIDE____________________________________________________________________
22 __________________________________________________________________ M210855EN-D
Mounting Rain Shield with
Installation Kit
Figure 12 Mounting Rain Shield with Installation Kit
Numbers refer to Figure 12 above:
1 = Fasten the rain shield with installation kit (Vaisala order code:
215109) to the metal mounting plate with 2 (M6) mounting
screws (provided).
2 = Fasten the mounting plate with rain shield with installation kit
to the wall or to the pole (see pole installation).
3 = Fasten the barometer to the mounting plate with 4 fixing screws
(provided).
Panel Mounting Frame
To enable a neat and dirt-free embedded installation of the transmitter,
a panel mounting frame is available as an option (Vaisala order code:
216038). The frame is a thin, flexible plastic frame for the transmitter,
with adhesive tape on one side. The frame is used to hide any rough
edges of the installation hole, and provide a more finished look. Note
that the panel mounting frame is not intended to bear the weight of the
transmitter, and does not include any mounting supports.
To use the panel mounting frame:
1. Use the frame as a template to mark the required size for the
installation hole in the panel.
2. Cut the hole in the panel.
3. Mount the transmitter through the panel with suitable supports.
4. Remove the paper protecting the adhesive tape on the frame, and
attach the frame around the transmitter. Refer to Figure 13 on
page 23.