Vaisala viewLinc 4.3 - Manual (Page 13)

Overview
viewLinc 4.3 4 | 4 5
setup, you may want to set up an Enterprise Server and one or more
Host Servers:
• viewLinc Enterprise Server: Gathers data from Devices, per-
forms scheduled transfers, watches for alarms, executes any asso-
ciated actions, manages Users, and controls system-wide and user-
specific settings.
• viewLinc Device Host: Runs as a service on a Host Server. It acts
as a data collection point for Devices located in the remote server
area. It functions in the same way as the Enterprise server, except
it forwards the collected data to the Enterprise server for processing
and storage.
viewLinc System Requirements
Before you install and set up Vaisala Veriteq viewLinc 4.3, you will need:
• One or more Vaisala Veriteq Loggers, Vaisala Wi-Fi Data Loggers
(HMT140) or 300 Series Transmitters.
• A PC (will be referred to in the rest of this document as the
viewLinc Server).
• (optional)
Additional PCs, if you plan to manage Devices at multiple
locations
(will be referred to in the rest of this document as a Host
PC).
• (optional) Remote Display terminals, if you plan to provide addi-
tional monitoring opportunities in locations without PCs.
• Vaisala cables, for connecting Loggers and setting up wireless Trans-
mitters.
• (optional) vNet Devices, for connecting Veriteq Loggers to a
viewLinc Server using an Ethernet connection
• (optional) Digi Devices, for connecting Veriteq Loggers to viewLinc
Server using an Ethernet connection
viewLinc Server and viewLinc Host PC Require-
ments
For optimum performance, your viewLinc Server PC requires 200KB
available per Channel per day for storing data.