VariZoom VZSNAPCRANE9-100 - Manual (Page 4)

4
FRONT SECTION
Next, attach the front section (printed with
“VariZoom”) to your crane. Loosen the dovetail
lock screw just enough to allow the two sections
to engage.
Slide the front section into place, tighten the
dovetail lock screw, and engage the latch. Now
pull the pins out of the camera platform and
attach it to the front section. Attach it to the front
section with the large pin and leave the small pin
hanging.
TAIL SECTION
Attach the Tail section to the rear of the pivot section. Loosen the dovetail lock screw just enough to
allow the two sections to engage, tighten lock screw, and engage the latch.