Videoswitch Vi-K3 - Manual (Page 19)

Vi-K2/Vi-K3 Universal
Keyboard
Vi-K2 Universal Keyboard User Manual
17
4.3 Monitor Selection
4.3.1 Using the main monitor text
The display that you wish to control may be selected by pressing the “BACK” key. The bottom right of the
DVR’s main monitor will indicate whether the spot monitor is selected. If no monitor is specified, it means
that the main monitor will be controlled .
Note that for this display selection method to work, that the Direct Addressing mode described below must
not have selected any other display other than 1.
4.3.2 Direct addressing
Alternatively, the display to be controlled may be selected as follows:
• Press
the
DISPLAY key
• The LED display will show the letter “D” followed by the currently selected unit number (1…16).
• Press one of the number keys 1, 2, 3…16 to select another display.
• Subsequent
camera selection will now apply to this display. Note that on a Vi-series Digital
Recorder, multi-screen, menus and replay are always displayed on the main monitor, irrespective of
the selected display.
4.4 Controlling Digital Recorders
All the keys necessary to control a Vi-series Digital Recorder (DVR) are provided on the Vi-K2/Vi-K3. Once
the correct unit number for the DVR has been selected as above (see section 4.1), it can be controlled in the
normal way using the Vi-K2/Vi-K3. Refer to the Vi-series Manual for details.