Videoswitch Vi-K3 - Manual (Page 86)

Vi-K2/Vi-K3 Universal
Keyboard
Vi-K2 Universal Keyboard User Manual
84
21.5 Presets
21.5.1 Recalling a Preset
• Press
the
PRESET key.
• The display will show the letter “P—”.
• Press one of the number keys 1, 2, 3…16 to select a preset that has previously been stored.
• The dome will move to that preset position.
• If the joystick is moved, the preset display will be cancelled.
21.5.2 Setting a Preset
• Move the dome to the position at which you wish to set a preset.
• Press and hold the ALT key and then press the STORE key.
• The display will show the letter “P—”, flashing.
• Press one of the number keys 1, 2, 3…16 to select a preset.
• Press and hold the ALT key and then press the STORE key to store the preset.
Presets can also be programmed via the in-built dome menu (Press
DOME then MENU to access the
menu).
21.6 Tours
21.6.1 Running a Tour
• Press
the
TOUR key.
• The display will show the letter “t—”.
• Press one of the number keys 1, 2 or 3 (or 4 for a tour of all presets) to run a tour that has
previously been stored.
• The dome will run the tour until the TOUR key is pressed again.
21.6.2 Programming a Tour
To start the tour programming:
• Holding
the
ALT key on, press the PROG key.
• The display will show the letter “t—”, flashing.
• Press one of the number keys 1, 2 or 3 to select a tour number.
• Holding
the
ALT key on, press the PROG key.
Repeat these steps for each position in the tour: