Videotec ULISSE - Manual (Page 11)

EN - English - I
nstruc
tions manual
9
4.2 Product markings
On the pan & tilt devices have a label complying with
CE markings.
Fig. 01
The label on the body shows:
• Model identification code (Extended 3/9 bar code)
• Power supply voltage (Volt)
• Frequency (Hertz)
• Absorbed current (Amps)
• IP weatherproof standard
• Serial number
4.2.1 Checking the markings
Before proceeding further with installation, make
sure the material supplied corresponds to the order
specification by examining the marking labels.
Never, under any circumstances, make any changes
or connections that are not described in this
handbook: the use of inappropriate appliances may
expose personnel and the system to serious safety
hazards.
4 Identification
4.1 Product description and type
designation
ULISSE has been specifically created for applications
of video surveillance in external environments.
This new positioning system integrates a high
performance P&T head with camera housing and
telemetry receiver in a particularly elegant design.
The rotation on the horizontal axis is continuous with
a variable speed up to 100°/s while the amplitude
on the vertical axis varies from +90° to -40° with a
max speed of 40°/s. ULISSE controls the functions of
autopan and patrol with a tracking accuracy of 0.02°
on preset positions upon recall. Patrol sequences can
also be varied with different speed settings in order
to customize a perfect patrol pattern.
ULISSE is equipped with a thermostatically controlled
heater and sunshield assuring an optimal operating
temperature; reinforced heater for temperature down
to -30°C (-22°F) also available. A built-in wiper option
is available which does not interfere with the viewing
range of the installed camera.
This system can also be equipped with incremental
encoders which guarantee a real position in any
operating condition.
In addition to the OSD set-up, the system is equipped
with an RS232 interface allowing the possibility to
update to the latest firmware version. The positioning
system is controlled through RS485/RS422. The
telemetry signal can be transmitted in an active
way for chain configuration of several ULISSE units
together.
The positioning unit can be used in several kinds
of installations, such as: coast and border patrol,
harbour control, urban settings, highway and traffic
monitoring, stadiums, industries, prisons or military
applications, and perimeter surveillance.