Apple LaserWriter 12/640 PS - Manual (Page 85)

4 Repeat steps 2 and 3 for each printer disk.
5 Open the folder you created in step 1.
The contents of each disk are contained in a folder named for that disk.
6 Open the LaserWriter Disk 1 folder.
7 Select the Installer and Installer Script icons and drag the icons from the LaserWriter
Disk 1 folder to the folder you created in step 1.
The Installer and the Installer Script need to be in the same window as the
folders for the disks you copied.
IMPORTANT Be sure to tell the users in your group where to find the software
and the name of the folder to look for on the server.
Installing the printer software from the server
After you’ve copied the software to the server as described earlier in
“Preparing a Server Using the CD-ROM Disc,” users can install the software
on their own computers by following these steps:
1 Turn off any automatic virus-detection programs on your computer before installing the
software.
If you don’t, problems may occur during the installation. After installation is
complete, you can turn the virus-detection programs back on. (For
instructions on turning off each virus-detection program, see the manual that
came with the program, or telephone the manufacturer of the program.)
2 Log on to the server from the computer where you want to install the software.
3 Open the folder that contains the printer software.
4 Double-click the Installer icon.
A dialog box opens to describe the installation.
5 Click the Continue button to close the dialog box.
60 Chapter 2