Apple LaserWriter 12/640 PS - Manual (Page 88)

This chapter describes how to set up the LaserWriter 12/640 PS for use with
IBM PC or compatible computers running Windows 3.1, Windows 95,
Windows NT, or DOS. It provides detailed procedures for setting up the
printer for use on a Novell NetWare network and instructions for installing
and using the Apple LaserWriter Utility for Windows.
System requirements for Windows 95
To use the printer, your computer system must meet these requirements:
m IBM PC or compatible, with an 80486 or higher CPU
m hard disk drive
m at least 8 MB of RAM
m Microsoft Windows 95
m CD-ROM drive or 3.5-inch floppy disk drive that reads 1.44 MB disks
m If you’re using the printer on a network, you must set up your network
client software. You may use Client Software for NetWare Network from
Microsoft as your network client software.
Installing all the printer software requires approximately 3.5 MB of free space
on your hard disk.
63
3 Setting Up the Printer for Windows, DOS,
and NetWare Users