Asus E3746 - Manual (Page 91)

ROG Striker II Extreme / Striker II NSE 4-13
Select Menu
Item Specific Help
Warning: this
function belongs
to overclocking,
and it may cause
instability. Select
a CPU level, and the
rest will be auto-
adjusted. If you want
to adjust more, set
Ai Overclock Tuner
to Manual after you
select a CPU level.
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu F10: Save and Exit
4.3 Extreme Tweaker menu
The Extreme Tweaker menu items allow you to configure overclocking-related
items.
Take caution when changing the settings of the Extreme Tweaker menu items.
Incorrect field values can cause the system to malfunction.
CPU Level Up [Auto]
AI Overclock Tuner [Auto]
x Overclock Options Disabled
x CPU Multiplier 8 X
x FSB - Memory Clock Mode Auto
x FSB - Memory Ratio Auto
x FSB (QDR), MHz 1333
Actual FSB (QDR), MHz 1333.3
x MEM (DDR), MHz Auto
Actual MEM (DDR), MHz 800.0
LDT Frequency [5x]
PCIE Bus, Slot 1&2, MHz [100]
PCIE Bus, Slot 3, MHz [100]
Memory Timing Setting
CPU Voltage [Auto]
Loadline Calibration [Disabled] Loadline Calibration [Disabled]
CPU PLL Voltage [Auto]
Scroll down to see more items.
4.4.1 Configure System Performance Settings
CPU Level Up [Auto]
Allows you to select a CPU level, and the related parameters will be automatically
adjusted according to the selected CPU level. If you want to manually configure the
settings in detail, set Ai Overclock Tuner to [Manual] after selecting a CPU level.
Configuration options: [Auto] [E6400] [E6550] [E6600] [E6700] [X6800] [E6850]
[Crazy]
Phoenix-AwardBIOS CMOS Setup Utility
Extreme Tweaker Main Advanced Power Boot Tools Exit
CPU VTT Voltage [Auto]
Memory Voltage [Auto]
NB Core Voltage [Auto]
SB Core Voltage [Auto]
1,5VSB Core Voltage [Auto]
CPU GTL_REF1 Ratio [Auto]
CPU GTL_REF2 Ratio [Auto] CPU GTL_REF2 Ratio [Auto]
CPU GTL_REF3 Ratio [Auto]
NB GTL_REF1 Ratio [Auto]
DDR3 CHA1 Ref Voltage [Auto]
DDR3 CHB1 Ref Voltage [Auto]
DDR3 CHA2 Ref Voltage [Auto]
DDR3 CHB2 Ref Voltage [Auto]
ROG Logo [Enabled]
CPU Configuration
Spread Spectrum Control
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu F10: Save and Exit
4.3.1 Configuring System Performance Settings
CPU Level Up [Auto]
Allows you to select a CPU level, and the related parameters will be automatically
adjusted according to the selected CPU level. If you want to manually configure the
settings in detail, set AI Overclock Tuner to [Manual] after selecting a CPU level.
Configuration options: [Auto] [E6300] [E6400] [E6550] [E6600] [E6700] [X6800]
[E6850] [E8200] [E8400] [E8500] [E6850] [Q9450] [Q9550] [QX9650] [QX9770]
[Crazy]
The configuration options may vary depending on your CPU type.