Asus E3746 - Manual (Page 93)

ROG Striker II Extreme / Striker II NSE 4-15
The following item becomes configurable when you set FSB-Memory Clock
Mode to [Unlinked].
MEM (DDR), MHz [800]
Allows you to adjust memory frequency. Use the <+> and <-> keys to adjust
the frequency. You can also type the desired frequency using the numeric
keypad. The values range from 800 to 3000.
Due to NVIDIA ® chipset features, ASUS BIOS will automatically adjust your
assigned frequency to an approximate value to achieve the optimal results.
Actual MEM (DDR), MHz
This item reflects the actual frequency after the system reboots.
LDT Frequency [5x]
Configuration options: [1x] [2x] [3x] [4x] [5x]
PCIE Bus, Slot 1 & 2, MHz [100]
Allows you to set the PCIEX16_1/2 overclocking frequency. Use the <+> and
<-> keys to adjust the frequency. The values range from 100 to 200.
PCIE Bus, Slot 3, MHz [100]
Allows you to set the PCIEX16_3 overclocking frequency. Use the <+> and
<-> keys to adjust the frequency. The values range from 100 to 200.
Memory Timing Setting
The currently detected values are shown under the “Current” field.
tCL (CAS Latency) [Auto]
Configuration options: [Auto] [5] [6]–[18]
Select Menu
Item Specific Help
CAS# latency (CAS# to
read data valid)
Set Memory timings
to [Optimal] to use
the value recommended
by the DIMM’s
manufacturer.
Phoenix-AwardBIOS CMOS Setup Utility
Extreme Tweaker
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu F10: Save and Exit
Memory Timing Setting
Parameters Setting Current
tCL (CAS Latency) [Auto] 6
tRCD [Auto] 6
tRP [Auto] 6
tRAS [Auto] 15
Command Per Clock (CMD) [Auto] 2T
** Advanced Memory Settings **
tRRD [Auto] 4
tRC [Auto] 21
tWR [Auto] 7
tWTR [Auto] 13
tFAW [Auto] 17
tREF [Auto] 7.6uS