Lenovo ThinkVantage (Rescue and Recovery 4.5) - Manual (Page 37)

Example: pdaguixx.ini
This example refers to pdaguixx.ini, which is a configuration file where you can customize elements of the
Rescue and Recovery environment. See “Customizing the preboot environment” on page 32.
Note: xx in the file name represents one of the following two-letter language abbreviations:
Table 16. Language codes
Two-letter language code Language
br dk en fi fr gr it jp kr nl no po sc sp sv tc Brazilian Portuguese Danish English Finnish French
German Italian Japanese Korean Dutch Norwegian
Portuguese Simplified Chinese Spanish Swedish
Traditional Chinese
Getting the file pdaguien.ini from the Rescue and Recovery environment
1. Create getlist.txt file with the following parameters:
\preboot\usrintfc\pdaguien.ini
2. Save the file as c:\temp\getlist.txt.
3. At a command prompt, type the following command:
c:\RRUTIL-g c:\temp\getlist.txt c:\temp
Putting the file pdaguien.ini back into the Rescue and Recovery environment
From a command line, issue the following command:
C:\RRUTIL.EXE -p c:\temp
Note: The PUT (-p) routine uses the directory structure created in the GET (-g) routine. For proper placement
of the edited file, ensure that the edited file is located in the same directory as the getlist.txt file, as follows:
c:\temp\preboot\usrintfc\pdaguien.ini
Example 1: Adding device drivers (such as ethernet) to the Predesktop Area
The following example provides instruction on adding device drivers to the Predesktop Area
1. Obtain device drivers from the vendor’s Web site or other media.
2. Create the following directory structures:
C:\TEMP\MININT\INF
C:\TEMP\MININT\SYSTEM32\DRIVERS
3. Copy all network driver *.inf files to the \MININT\INF directory. (For example, E100B325.inf needs
to be in the \MININT\INF directory.)
4. Copy all *.sys files to the \MININT\SYSTEM32\DRIVERS directory. (For example, E100B325.sys needs
to be in \MININT\SYSTEM32\DRIVERS directory.)
5. Copy any related *.dll, *.exe, or other files to the \MININT\SYSTEM32\DRIVERS directory. (For example,
the E100B325.din or INTELNIC.dll files must be in the \MININT\SYSTEM32\DRIVERS directory.)
Notes:
a. Catalog files are unnecessary, as they are not processed by the Rescue and Recovery environment.
The preceding instructions apply to any device driver that might be required to configure the
computer.
b. With the limitation of Windows PE, you might have to manually apply some configuration applications
or settings as registry updates.
6. To put the device drivers into the Rescue and Recovery environment, enter the following from a
command line:
C:\ RRUTIL.EXE -p C:\temp
Chapter 3 . Configurations 31