Lenovo ThinkServer RD340 User Manual
Page 159
8. Position the PCI Express solid-state drive near the PCI Express card slot on the riser card assembly 1.
Then, carefully press the PCI Express solid-state drive straight into the slot until it is securely seated and
the bracket also is secured by the riser card assembly 1.
Figure 105. Installing the PCI Express solid-state drive
9. Reinstall the riser card assembly 1. See “Replacing the riser card assembly 1” on page 160.
10. If you are instructed to return the old PCI Express solid-state drive, follow all packaging instructions and
use any packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the replacement, go to “Completing the parts replacement” on page 170.
Replacing the ThinkServer RAID Super Capacitor Module
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 73.
This topic provides instructions on how to replace the ThinkServer RAID Super Capacitor Module. This topic
applies only to server models that have a ThinkServer RAID Super Capacitor Module installed.
The ThinkServer RAID Super Capacitor Module protects the cache memory on the installed ThinkServer
RAID 710 Adapter. You can purchase a ThinkServer RAID Super Capacitor Module from Lenovo.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Notes:
• Depending on the model, your server might look slightly different from the illustrations in this topic.
• Use any documentation that comes with the ThinkServer RAID Super Capacitor Module and follow those
instructions in addition to the instructions in this topic.
To replace the ThinkServer RAID Super Capacitor Module, do the following:
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
Installing, removing, or replacing hardware
147