Cru identification – Lenovo ThinkServer TD350 User Manual

Page 42

Advertising
background image

The following illustration shows the components of server models with one easy-swap-drive module.

Figure 10. Components of server models with one easy-swap-drive module

1

Easy-swap-drive module

2

System fans

3

PCIe card holder

4

CPU1 DIMMs (vary by model)

5

CPU2 DIMMs (vary by model)

6

Heat sinks (vary by model)

7

Intrusion switch (available on some models)

8

Coin-cell battery

9

CPU1 DIMMs (vary by model)

10

PCIe card holder

11

Cooling shroud

CRU identification

CRUs are parts that can be upgraded or replaced by the customer. If a CRU is determined to be defective
during the warranty period, a replacement CRU will be provided to the customer. Customers are responsible
for installing the self-service CRUs for this product. Customers also can install optional-service CRUs, which
might require some technical skills or tools, or request that a technician install the optional-service CRU
under the terms of the applicable warranty service type for your country or region.

Non-CRUs must be replaced only by trained service technicians.

The following table lists the major FRUs in your server and the CRU identification information. For a complete
listing of FRU information, such as FRU part numbers and supported server models, go to:
http:/www.lenovo.com/serviceparts-lookup

28

ThinkServer TD350 User Guide and Hardware Maintenance Manual

Advertising