AirLive MW-2000S - Manual (Page 157)

Chapter 7. Web Interface Configuration
AirLive MW-2000S User’s Manual 152
7.5.4 Restart
This function allows the administrator to safely restart MW-2000S and the process should take about 100 seconds.
Click YES to restart MW-2000S; click NO to go back to the previous screen. If turning off the power is necessary, it is
recommended to restartMW-2000S first and then turn off the power after completing the restart process.
Caution: The connection of all online users of the system will be disconnected when system is in the process of
restarting.
7.5.5 Network Utilities
This function allows the administrators to manage functions including Wake-on-LAN, Ping, Trace Route, and
showing ARP Table by entering IP or Domain Name.
¾ Wake on LAN: It allows the system to remotely boot up a power-down computer with Wake-On-LAN
feature enabled and is on the LAN side. Enter the MAC Address of the desired device and click Wake Up
button to execute this function.
¾ Ping: It allows administrator to detect a device using IP address or Host domain name to see if it is alive or
not.
¾ Trace Route: It allows administrator to find out the real path of packets from the gateway to a destination
using IP address or Host domain name.
¾ ARP Table: It allows administrator to view the IP-to-Physical address translation tables used by address
resolution protocol (ARP).