6 private lan configuration, Private lan configuration – AirLive MW-2000S User Manual
Page 92
Chapter 7. Web Interface Configuration
AirLive MW-2000S User’s Manual
87
7.1.6 Private LAN Configuration
When accessing the network through the Private LAN port, users are not required to be authenticated. In this
section, you can set the related configuration for the private LAN port and DHCP server.
y
Private LAN
Operation Mode: Choose one of the two modes, NAT mode and Router mode, by the requirements.
IP Address: Enter the desired IP address for the uncontrolled port.
Subnet Mask: Enter the desired subnet mask for the uncontrolled port.
y
DHCP Server Configuration
There are three methods to set the DHCP server:
1. Disable DHCP Server: Disable DHCP Server function.
2. Enable DHCP Server: Choose “Enable DHCP Sever” function and set the appropriate configuration for
the DHCP server. The fields with red asterisks are required to be filled in.