Anchor MESH POOL COVER - Manual (Page 11)

11
1. Before tightening the pool cover anchors near the steps, tuck step wedges under the overlap edge of the
cover, as needed.
2. Pull the outer edge of the cover to the outside flap of the wedges and clip the flap to edge of the cover
using the fasteners provided.
3. Install the springs and anchors to tighten the cover.
4. Be sure that the last springs near the top and bottom steps are snugged up close to the wedge to secure
it firmly in place.
5. Step Wedges come in custom sizes measured on the horizontal dimension along the step. Custom sized
wedges will be made upon request.
STEP 9: STEP WEDGES
POOL COVER
w/ OVERLAP
POOL COVER SPRING
SNUGGED CLOSE TO
BOTTOM STEP WEDGE.
STEP WEDGES TUCKED UNDER EDGE
OF POOL COVER OVERLAP AND
CLIPPED AT OUTER FLAP.
SPRINGS LOOSENED UNTIL STEP
WEDGES ARE IN PLACE
WEDGES FOR
DESCENDING SIDE.
STEP 9A
CLIP FOR
STEP
WEDGES