Despatch S Type User Manual
Page 4
I-235 (9/03)
−
1
−
INSTALLATION INSTRUCTIONS
The enclosed drawings, installation instructions and general information sheet are for use by the
purchaser to enable them to contract local qualified personnel to erect an oven with a minimum
of lost motion and without the services of a Despatch Engineer.
It is suggested that the person selected to supervise the erection read the general information
sheet and installation instructions thoroughly, referring to the specific drawings and details for
your oven which should be included in this packet. Then follow the installation instructions as
listed.
WARNING - THESE INSTRUCTIONS ARE BASED IN PART ON SAFETY
CONSIDERATIONS, THEREFORE, ONLY QUALIFIED PERSONNEL SUCH AS
EXPERIENCED RIGGERS SHOULD ATTEMPT THIS INSTALLATION.
If you receive your oven with body set up, then you may disregard those steps that have already
been completed. However, we would recommend reading this manual completely to understand
more about your oven and how it is built. Illustration 17 will be especially helpful in placing the
heater box on top of the oven.
The instructions are not intended to describe in detail or provide a solution for all the problems
which could arise, as each unit presents its own peculiar problems. With good judgment and the
use of the enclosed information, minimal difficulties should be encountered.
If you would like to investigate the use of an experienced Despatch Installation Supervisor,
contact our Service Department at the telephone number listed below.
DESPATCH INDUSTRIES
8860 207
th
St. West
Lakeville, MN 55044
TELEPHONE: 952-469-5424 or
Despatch Help Line: 1-800-473-7373