Labnet Z100A Clinical Lab Centrifuge - Manual (Page 3)

2
1. General Information
- This manual is intended for use with the Z100-A
(C0100-A) Centrifuge.
1.1 Description
The Z100-A is a small bench top centrifuge designed for
sedimentation of various samples. The Z100-A has a
built in angle rotor capable of running up to to 4,000 rpm (1,900 x g.)
This product is for research only.
1.2 Safety precautions to be observed before operating the centrifuge
Do not operate if:
- The centrifuge has not been installed correctly.
- The centrifuge is partly dismantled.
- Service has been attempted by non-authorized or non-qualified
personnel.
- Rotors and accessories are not part of the standard range of accessories
or have been obtained without the prior permission of the
manufacturer.
Exception: tubes and bottles made of glass or plastic normally available
in the laboratory, and designed for centrifugation.
- The centrifuge is to be used in explosive atmospheres.
- You intend to centrifuge combustible and explosive materials.
- You intend to centrifuge materials which are chemically reactive.
If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
1.3 Technical Data
Model No. C0100-A
Dimensions:
Width
295 mm (11.6 inch)
Depth 348 mm (13.7 inch)
Height 101 mm (10.1 inch)
Weight 5.5 kg / 12 lbs
Max. speed 4,000 rpm
Max. volume 90 ml (6 x 15ml)
Max. RCF 1,900 x g
Maximum Admiss. density 1.2 kg/dm 3
Rotor radius 10.62 cm
Timer 0 to 30 minutes or continuos
Electrical ratings 120 V/50-60 Hz, 1 Amp
The manufacturer reserves the right to make technical modifications
!