Lenze 8200 Frequency inverters User Manual
Manual, Global drive frequency inverters 8200
Advertising
Table of contents
Document Outline
- Title
- This Manual is valid for...
- Contents of the Manual (survey)
- Front view
- Table of Contents
- Part A
- Part B
- 3 Technical data
- 4 Installation
- 4.1 Mechanical installation
- 4.1.1 Important notes
- 4.1.2 Standard assembly with fixing rails or fixing brackets
- 4.1.3 DIN-rail assembly
- 4.1.4 Assembly with thermally separated power stage ( push-through technique )
- 4.1.5 Assembly of the variant 82XX-V003 flcold platefl
- 4.1.6 Assembly with mains filter
- 4.1.7 Assembly of the analog plug-in module 8279IB
- 4.2 Electrical installation
- 4.3 Installation of a CE-typical drive system
- 4.1 Mechanical installation
- Teil C
- 5 Commissioning
- 6 During operation
- Part D
- 7 Configuration
- 7.1 8201BB operating module
- 7.2 Structure of the operating program
- 7.3 Change and store parameters
- 7.4 Operating functions
- 7.5 Control functions
- 7.5.1 Speed range (fdmin, fdmax)
- 7.5.2 Acceleration and deceleration times Tir, Tif
- 7.5.3 Current limit values (Imax limit values)
- 7.5.4 Current limitation controller (Imax controller)
- 7.5.5 Control mode
- 7.5.6 V/ f characteristic
- 7.5.7 Configuration
- 7.5.8 Motor data detection
- 7.5.9 Running optimisation
- 7.5.10 PID controller as process controller
- 7.5.11 Setpoint input
- 7.5.12 Controller enable RFR
- 7.5.13 Start conditions/ flying-restart circuit
- 7.5.14 Function of the inputs to be configured block by block
- 7.5.14.1 Level inversion for digital inputs
- 7.5.14.2 Priority mask for digital inputs
- 7.5.14.3 Change of the direction of rotation (CW/ CCW)
- 7.5.14.4 Quick stop QSP
- 7.5.14.5 DC-injection brake (DCB)
- 7.5.14.6 Parameter set changeover PAR
- 7.5.14.7 TRIP set
- 7.5.14.8 Manual/ remote changeover
- 7.5.14.9 Digital frequency input
- 7.5.15 Indirect torque limitation
- 7.6 Display functions
- 7.7 Monitoring functions
- 7 Configuration
- Part D1
- Part D2
- Part E
- Part F
- 10 Network of several drives
- 10.1 Function
- 10.2 Conditions for trouble-free network operation
- 10.3 Selection basics
- 10.4 Central supply
- 10.5 Decentral supply
- 10 Network of several drives
- Part I
- Part K
- Part L
- Part M