Victorio VKP1024A Deluxe Grain Mill - Manual (Page 16)

14
Motor Use Instructions
Make sure you have read the Important Safety Instructions on
p. 11 before installing the motor.
Installation Steps:
1. Remove the motor from the packaging and
make sure the power switch is in the off
(“O”) position (see diagram on p. 13) and the
motor is unplugged.
2. Use the crank handle to position the grain
mill shaft so the motor shaft key is aligned
with the notches (see diagram at right).
3. Once the shaft is positioned correctly, insert
the motor shaft into the grain mill shaft by
pushing forward on the motor.
4. Now that the motor has been inserted, twist the motor counter-
clockwise to lock it into place (see diagrams below).
5. You will know the motor has been installed
correctly when the motor latch is secure around
the grain mill body (see diagram at right).
Twist Counter
Clockwise