Audio Developments AD114 - Manual (Page 29)

28
CONVERTER PARTS LIST
Item Part Number Qnty CAD Part Ref. Ref. Designator
1 18-001-256 9 CCU#100N C3, C5, C9, C13, C16,
C21, C22, C23, C24
2 18-001-229 1 CCU#220P C6
3 18-013-716 3 CER100-63 C7, C8, C10
4 18-013-219 5 CER330-16 C2, C11, C12, C14,
C15
5 18-013-320 5 CER470-25 C4, C17, C18, C19,
C20
6 12 CONSWIR WIRE1, WIRE2, WIRE3,
WIRE4, WIRE5, WIRE6,
WIRE7, WIRE8, WIRE9,
WIRE10, WIRE11,
WIRE12
7 USE_STANDARD_WIRE 2 CONWWIR WIRE13, WIRE14
8 72-011-001 1 DIO-1N4001 D1
9 72-010-001 2 DIO-1N4148 D3, D4
10 72-010-004 3 DIO-UF4002 D5, D6, D7
11 74-034-007 1 IC-4007 IC1
12 22-505-203 1 IND-U0.2#220UH L1
13 22-505-102 3 IND-U0.4#220UH L2, L3, L4
14 40-115-001 1 LED-5MM#RED LED1
15 36-166-500 1 MIS-FS2# MIS-FS2-/1
16 27-025-002 1 MOL2PIN CON2
17 27-025-003 2 MOL3PIN CON1, CON3
STEREO LINE MODULE
The two electronic- balanced inputs have instrumentation grade amplifiers for
optimum performance at line level.
The offset control BAL (1) allows up to 10dB (±5dB about the centre) of continuously
variable gain compensation between the input signals. This enables a stereo ganged
fader to be used.
EQ-IN (5) is a two position by pass switch for the equaliser. When IN is selected the
three adjacent rotary controls labelled HF, MF & LF are in circuit providing 3 bands of
equalisation. These controls act simultaneously and equally on both the left and right