Dell PowerEdge 2450 - Manual (Page 104)

10-4 Dell PowerEdge 2450 Systems Installation and Troubleshooting Guide


  



6. Open the handle on the new hard-disk drive carrier.
7. Align the edge of the carrier with the notch in the system bezel and insert the car-
rier into the drive bay (see Figure 10-3).
8. Close the drive carrier handle to lock the new drive carrier in place.
9. If you removed the bezel in step 2, reinstall it now.
10. Install any required SCSI device drivers.
See Chapter 3, “Installing and Configuring SCSI Drivers,” in the User's Guide for
information.
11. If the hard-disk drive is a new drive, run the Dell Diagnostics to test the new
drive.
  
  
 
  
Follow these general guidelines when you install a Dell host adapter card. For specific
instructions, refer to the documentation supplied with the PERC host adapter card.
&#"

'(

   
   !  )

 
 
 
!
 
  
   
 *

 
 
)
+,  * -*
.
 .

!
 /
hard-disk drive carrier handle
hard-disk drive carrier