Vertical Communications 8324S - Manual (Page 102)

You may save as many different fixed RESPONSE MESSAGE buttons
as you need.
•
To store a fixed RESPONSE MESSAGE button,
1. Press INTERCOM.
2. Dial ✳ ✳ 6.
3. Press programmable button for RESPONSE MESSAGE button
location.
4. Dial message number (01-30) from list of messages.
5. Press # to save programming.
6. Press SPEAKER to end.
7. Label button location.
NOTE: Your system installer can also program response messages.
9.6 Storing Access Codes
You can store feature access codes at programmable buttons to provide
yourself with one-button access to features that you use quite often. To
find your feature codes of interest, turn to the Quick Reference Guide
that is located at the end of this publication.
Remember, your LCD speakerphone provides interactive buttons that
eliminate almost every need for feature code dialing. Further, the
installer may store frequently-used features at your telephone buttons
and label the buttons with the feature’s mnemonics. Finally, you can
follow the instructions provided in section 9.4 to directly assign feature
buttons without having to store their feature dialing codes.
•
To store an access code,
1. Press INTERCOM.
2. Dial ✳ ✳ 3.
3. Press programmable button.
4. Dial access code for feature (for example to create a call divert
button, store ✳55 plus an extension number).
5. Press SPEAKER to end.
6. Label button location.
Programming Your Telephone GCA70–250
9 – 8 LCD Speakerphone Reference Manual