Vertical Communications 8324S - Manual (Page 91)

8.2 Sending LCD Messages
You can set system-supplied messages at your station to be received and
displayed by a calling LCD speakerphone. These messages give the
caller information on your telephone status. Get a list of the available
messages from the attendant and write them on the blank chart on the
next page.
•
To turn on a message from your telephone,
1. Press INTERCOM, then dial ✳ 0 2.
2. Dial the desired code number from your message list (01–30) on
the next page. Alternately you can use the HOLD button to scroll
through the available messages and dial # when you scroll to the
message you want to use. If you use the default messages Back at
and Call, add to them as follows:
For Back at message, dial the code for time numbers and colon
from dialing codes table (for example, dial # 00 01 29 04 05 for
the time 01:45).
For Call message, dial code for telephone number of where you’ll
be (for example, dial # 09 07 08 15 02 02 00 00 for the number
978–2200.
3. Press #, then press SPEAKER to end message.
4. Intercom light flashes.
•
To turn off the message and your intercom light,
1. Press INTERCOM, then dial # 0 2.
Dialing Code Table
Character Dialing Code Character Dialing Code
1 01 8 08
2 02 9 09
3 03 0 00
4 04 space 12
5 05 – 15
6 06 : 29
7 07
GCA70–250 Sending And Receiving Non-Verbal Messages
LCD Speakerphone Reference Guide 8 – 3