Controls in detail —continued, Self-timer, Mirror lockup lever – Nikon F3 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONTROLS IN DETAIL —continued-
28
Self-timer
The F3's blinking self-timer provides a 10-sec. delay in
shutter release.
To operate the self-timer:
Mirror lockup lever @
When using super-telephoto lenses or doing photomicro
graphy, it becomes necessary to reduce camera vibration
to the absolute minimum. To lock the reflex viewing
mirror in the "up" position, push in the depth-of-field
preview button and rotate the lever counterclockwise
until it stops.
Note:
Two Nikkor lenses require that the mirror be locked up beiore
mounting—the Fisheye-Nikkor 6mm f/5.6 and OP Fisheye-Nikkor 10mm
{/5.6.
Caution:
With the mirror locked up. you should not operate the camera
on automatic. Even though the LCD continues to show you the shutter
speed automatically selected by the camera, this speed will not produce
the correct exposure.
1. Push the self-timer lever
to uncover the red dot
2. Push the shutter release but
ton.
3. Watch the blinking red LED
© on the front of the camera.
The LED blinks faster during
the final two seconds before the
shutter opens to warn you to
get ready.
i
4
.
Don't forget to return the
self-timer to its original posi
tion after using it.
If you want to cancel the self
timer after pushing the shutter
release button, return the self
timer lever to its original posi
tion. The picture then will not
be taken.