Arc Machines 217 WDR - Manual (Page 12)

M O D E L 2 1 7 W D R
O P E R A T O R ’ S M A N U A L
8
2.4 PROGRAMMABLE AND OPERATIONAL FUNCTIONS
SINGLE ENTRY PARAMETERS AND FUNCTIONS
FUNCTION RANGE
WELD TYPE (PULSED, NON-PULSED, STEP,
TACK, S^3)
SELECTABLE
NUMBER OF LEVELS 1 - 99 LEVELS
START CURRENT 5 - 150 AMPS
PREPURGE 10 - 1000 SECONDS
POSTPURGE 10 - 1000 SECONDS
TRAVEL START DELAY 0.0 - 100 SECONDS
TRAVEL DIRECTION CW or CCW
MULTI-LEVEL PARAMETERS AND FUNCTIONS
The following parameters and functions can be programmed in each level to change
value during a weld sequence.
DOWN SLOPE 0.0 – 99.9 SECONDS
LEVEL TIME 0.0 – 999.9 SECONDS
PRIMARY (HIGH) AMPS* 5 – 150 AMPS
BACKGROUND (LOW) AMPS 5 – 150 AMPS
SLOPE TIME CANNOT EXCEED LEVEL TIME
PRIMARY SPEED (RPM) 0.0 RPM TO WELD HEAD MAX.**
PRIMARY SURFACE SPEED (INCHES PER MINUTE) CALCULATED
AVERAGE AMPS CALCULATED
FREQUENCY (Hz.) CALCULATED
% PRIMARY AMPS 1% – 100%
PRIMARY (HIGH) PULSE TIME 0.01 – 9.99 SECONDS
BACKGROUND (LOW) PULSE TIME 0.01 – 99.9 SECONDS