Gastroback 42620 Design Espresso Advanced - Barista Edition User Manual

Page 20

Advertising
background image

56

57

sTep 8 - inserTing THe porTAfilTer

Place the portafilter underneath the group head so that the handle is aligned with the insert

graphic.
Insert the portafilter up into the group head and rotate the handle to the right until resistance

is felt, this will be at an approximate 90° angle to the machine.

sTep 9 – eXTrAcTing THe espresso
• Ensure all the button surrounds on the control panel are illuminated, indicating the machi-

ne has reached the correct temperature for brewing, and is ready for use.
• Ensure the drip tray and portafilter are in place.
• Place one or two pre-warmed cups beneath the portafilter outlet.
note: pre-Brew funcTion: When a preset shot size on the front, right hand side of

the machine is selected, the machine will pump water momentarily, followed by a pause then

continue to pump the water through to the grounds in the portafilter. The ground coffee is

moistened by a small amount of water before full extraction. This expands the grinds, resul-

ting in greater pressure build-up to extract all the oils and full flavor from the ground beans.

preseT sHoT siZe - one sHoT
Press the

-button once. A preset extraction of approximately 1 oz of espresso will be

delivered. A pumping noise will be heard in this operation. The machine will automatically

stop once the preset pour has been delivered.
note: The amount of espresso extracted in the cup will vary depending on the coarseness

of your grind and grind amount
note: When using a single shot filter, for optimal flavor, you should only extract appro-

ximately 1 oz. When using a double shot filter, for optimal flavor, you should only extract

approximately 2 oz.

preseT sHoT siZe - DouBle sHoT
Press the

-button once. A preset extraction of approximately 2oz of espresso will be

delivered. A pumping noise will be heard in this operation. The machine will automatically

stop once the preset pour has been delivered.
note: Pressing the

-button or

-button during an extraction will immediately stop

the pour.

progrAmming single espresso
Programming over-rides the preset shot sizes (1oz or 2oz), re-programming the button to

pour your preferred shot size.

Advertising