Main receiver and usb cable, 3 main receiver and usb cable – QOMO QClick V7 User Manual
Page 139
Copyright © 2012 All Rights Reserved by QOMO HiteVision.
www.qomo.com
139
13.
“Stop”, it is used to stop gathering the response information from the participants’ remotes.
Note:
Each of the clickers is battery operational. Insert two “AAA” batteries into the port on the back of the
clicker as indicated on the hardware. Slide the back plate into place. For a more secure closure, use
the screwdriver to insert the screw. The Screws and screwdriver are provided for your convenience.
Do not over tighten in order to avoid stripping the screw. When the batteries have expired, remove
the screw and back plate and replace the batteries with fresh ones. Re-secure the back plate and
screw, as necessary.
Enclosed in this package are the following items
Screwdriver
Screws
5.3 Main Receiver and USB Cable
Used to receive signals from the remotes and send information. The main receivers is connected to
computer through USB cable
Specifications
Dimension (l w h): 76mm x 23mm x 10mm
Weight: 26g
Operating Temperature: 0-40 degree
Operating Relative Humidity: 0-90%
Receiving distance: ~200 feet radial
Function: Used to receive signals from the remotes, and send information to the computer.
Illustration
7-
QRF300 Main Receiver