QOMO QClick V7 - Manual (Page 66)

Copyright © 2012 All Rights Reserved by QOMO HiteVision.
www.qomo.com 66
To join the quiz, follow these steps:
1. If you didn’t join the class previously, you may have to login to the current class and then
register and join the class.
2. If you joined the current class previously, simply press the “Send” key to get a short cut to
directly register for the class.
3. If your keypad ID is not listed in the current class, you will need to set your keypad ID to the one
listed in the class, or try to force a login. The instructor will choose to allow the participation of a
non-registered student.
4. You can begin to answer the questions at your own pace, using the Up Key /Down Key
to scroll up and down to v iew the questions. Use the “Menu/OK” key to save your
answers into the keypad.
After you have finished, press the “Right Soft” key to select the “Option” menu and select
the item “Send Answer” to turn in your answers.
2.2 Instructor Keypad
2.2.1 Specifications
Dimension (L × W × H): 5 inches x 2 inches x 1 inch
Keys: 21
Power required: 2 AA Batteries
RF transmission distance: ~200 feet
Battery life: 6 months to 1 year depending on use
(Not including laser pointer use and Offsite mode use)
Function: Instructor/Presenter
Note:
Each of the clickers is battery operational. Insert two “AA” batteries into the port on the back of the
clicker as indicated on the hardware. Slide the back plate into place. For a more secure closure, use
the screwdriver to insert the screw. The Screws and screwdriver are provided for your convenience.
Do not over tighten in order to avoid stripping the screw. When the batteries have expired, remove
the screw and back plate and replace the batteries with fresh ones. Re-secure the back plate and
screw, as necessary.
Enclosed in this package are the following items
Screwdriver
Screws