Allen&Heath Qu-32 - Manual (Page 49)

Qu Mixer User Guide 49 AP9372 iss.5
The Filter screen
A Recall Filter protects one or more parameter types
for all channels.
A scene stores all live mixing parameters. A Recall
Filter can be set to protect (block) chosen parameters
from being overwritten when the scene is recalled.
Each scene has its own filter. You can choose to recall
as many or as few parameters as you want for each
scene. For example, you could recall just fader levels
and mutes for a range of cues in a theatre show.
The Global Filter protects parameters from being
overwritten by any of the 100 scenes.
A red dot o appears in the tab if one or more items
have been blocked.
Filter parameters are grouped according to type and
association with inputs or outputs.
Note - The Qu-16 does not include Audio Groups and
Matrix outputs. Their associated parameters are not
included in its filter.
Filter parameters:
Inputs/FX (All CH, ST, FX Ret, Groups)

Input patch (Local, dSNAKE, USB)

Preamps (Gain/Pad/Trim/48V/Pol)

CH/ST process (Gate/PEQ/Comp/Dly)

Group processing (not Qu-16)

FX patch

FX parameters
 Inputs/FX/Group Faders/Pan

Inputs/FX/Group Mutes

Inputs/FX/Group Names
Outputs (All FX Sends, Mix, LR, Matrix)

Input patch

Output patch (Sockets, Qu-Drive)

Mix process (PEQ/GEQ/Comp/Dly)

LR process (PEQ/GEQ/Comp/Dly)

Matrix processing (not Qu-16)

Master Faders
 Master Mutes

Master Names
Routing

Audio Groups (Assign)

Mix sends (Lev/Pan/Assign/Pre)

FX sends (Lev/Assign/Pre)

Matrix sends (Qu-24 only)

Mute/DCA Groups (Assign)
Other

Mute/DCA Group Masters and Names
 Custom Layer (Assign)

SoftKeys (Assign)

System (Talkback assign/HPF)