Allen&Heath Qu-32 - Manual (Page 33)

Qu Mixer User Guide 33 AP9372 iss.5
To assign Mute Groups - Select the Mute Group
Assign tab, then touch the tab for the Mute Group you
wish to assign.
To assign DCA Groups - Select the DCA Group
Assign tab, then touch the tab for the DCA Group you
wish to assign.
All sources to that group are shown. The larger Qu
mixers present two pages of assignments. Touch the
arrow button to navigate between the two pages.
Touch buttons to assign sources in or out of the
group.
Touch the All button to turn all the assignments in or
out. This affects assignments on both pages.
A yellow dot o in the tab indicates that one or more
sources are assigned within the tab.
Press the Fn key again to close the Mute/DCA view.
6.13 Using Mute Groups
There are 4 ways to access the Mute Groups:
1. Touch the master buttons on the Home screen.
2. While in any Routing screen, press the Fn key to
open the Mute/DCA view. Touch the Mute master
buttons in the Masters tab.
3. Assign and use one or more SoftKeys as Mute
Group masters. Any Mute Group can be assigned to
any SoftKey.
4. Use the Qu-Pad iPad app Mute Group strips.
The Mute key will flash red if the channel is muted by a
Mute or DCA Group.
A short flash shows it is muted by the group only. A
long flash shows it is muted by its Mute key and a
Mute or DCA group.
Fn key