Leica Geosystems Leica DISTO Pro - Manual (Page 45)

47 DISTO™ pro 4 / pro 4 a-1.0.0en English
en
Memory, contd.
Repeatedly press
corresponding key to call up
the desired special character.
(described in section
"Keypad" under "Text and
data input").
Wait with next input until the
cursor has moved a position
further.
Press briefly for "space".
Press and hold to enter the
number "0".
Press briefly, to move back
one space and overwrite the
last entry.
Repeat above process to
delete entries step by step.
Press briefly to end and save
text input.
After a confirmation, the basic
settings are displayed.
The menu function Send (6.4.5),
enables the saved data to be
transmitted to a PC and displayed in
an Excel sheet.
Store (6.4.2)
Menu function to store measured and
computed values into the data
memory.
Store with menu
Precondition: The value to be stored
is displayed in basic settings.
After calling up the menu function,
the next free memory location is
displayed.
Additionally, a three line text with a
maximum length of 8 characters per
line, can be entered using the
keypad.
data 6.4
1 text
2 store
3 change
4 erase
5 send
This submenu manages data
memory.
Default settings: none, meaning that
a reset (3.4) does not delete the
data memory.
text 6.4.1
001
abc
The first memory location of the
stack is displayed.
Select desired memory
location with the navigation
keys or by direct keypad
entry.
Press briefly to call up
content.
After a short confirmation, the
memory content is displayed in
basic settings.
Data (6.4)
Text (6.4.1)
This menu function is used to enter
text in the data memory, e.g. to
document measurements.
After calling up this menu function
the next free memory location is
displayed.
Using the keypad, a text of maximum
30 characters can be entered.
The text is displayed in three lines,
but transmitted as one line via the
data interface.
...
Press briefly to change
between small and capital
letters.
store 6.4.2
002
abc
_ >
2.493