Calculator (7), Division (7.1), X2 (7.2) – Leica Geosystems Leica DISTO Pro User Manual

Page 48: Square root (7.3)

Advertising
background image

50

DISTO™ pro

4

/ pro

4

a-1.0.0en

English

en

The first value to be calculated with

is displayed in small font size.

The second number may be

• entered with the keypad,

• recalled from memory key or from

the stack,

• determined by a distance

measurement.

Press briefly to compute.

The result is displayed in the basic

settings.

x

2

(7.2)

Precondition: The first value to be

computed with has to appear in the

basic settings.

After calling up the menu function the

computation is performed

immediately and the result displayed

in the basic settings.

Square root (7.3)

Precondition: The first value to be

computed with has to appear in the

basic settings.

After calling up the menu function the

computation is performed

immediately and the result displayed

in the basic settings.

The calculation functions in this

submenu supplement the four funda-

mental rules of arithmetics as

described in section "Simple

calculations".

If the wrong measuring units

are used the following error

message appears:

• Area and volume dimensions cannot

be squared.

• From lengths or volume dimensions

no square roots can be calculated,

etc.

Division (7.1)

Precondition: The first value to be

calculated with has to appear in the

basic settings.

Each entry with the keypad has to be

confirmed with the Enter key.

After calling up the menu function the

following is displayed:

menu

2 end cover

3 basic settings

4 basic functions

5 calculation

6 memory

7 calculator

, 6x

After calling up this menu function,

the following is displayed:

Memory, contd.

position

6.4.5.2

001

-

>

200

-

>

The vertical bar shows memory

location from the first to the last

location.

Selecting memory locations for data

transmission :

Place arrow on the first or

last memory location.

Enter the first and the last

memory location and then

one after the other the

selected memory location

numbers of the memory area.

Press briefly to confirm

selection and to start data

transfer.

...

During transmission, the number of

the current data memory location

being transmitted from is displayed.

At the end of the transmission the

submenu is displayed again.

Calculator (7)

calculator

7

1 division

2 x

2

3 square root

--.---m

/ 13.510m

Advertising