OEM Controls CANBus Product Line - Manual (Page 12)

OM-17288
CANBus USERS MANUAL Page 12 of 38
Revision C
GJO*07-12-06
ORIGINAL
J1939 “Y” Connectors
OEM recommends the use of Deutsch DT series connectors
manufactured for the specific purpose of CANBus communication.
J-1939/11 3-WIRE SYSTEM
Receptacle
DT04-3P-P007 Receptacle, “Y” Connector
DT04-3P-E008 Receptacle, Grey, w/Shrink Boot Adapter
DT04-3P-EE01 Receptacle, Black, w/Shrink Boot Adapter
Plug
DT06-3S-E008 Plug, Grey, w/Shrink Boot Adapter
DT06-3S-EP11 Plug, Black, w/Shrink Boot Adapter
DT06-3S-P032 Plug, Black, w/Shrink Tubing Adapter, Single Piece
Wedge Lock
W3P-1939 Wedge Lock, Blue
W3S Wedge Lock, Orange
W3S-P012 Wedge Lock, Green
W3S-1939 Wedge Lock, Blue
W3S-1939-P012 Wedge Lock, Blue
Pins/Sockets
0460-202-1631 Pin, Size 16, Gold
1060-16-0144 Pin, Size 16, Gold, Stamped & Formed
0460-247-1631 Pin, Size 16, Extended
0462-201-1631 Socket, Size 16, Gold
1062-16-0144 Socket, Size 16, Gold, Stamped & Formed
0462-221-1631 Socket, Size 16, Extended
CANBus
Cable Assembly
OEM recommends running Twisted Shielded Pair cable between
Modules, wired to the J1939 3 pin connector as follows;
PIN FUNCTION WIRE COLOR
A CAN(H) YELLOW
B CAN(L) GRAY OR GREEN
C SHIELD BRAIDED STRAND