Brother CM-2000 - Manual (Page 93)

-tf'*».-.- '.i....
'"f-; :/¿^.;í;'"■
_ ■ .-■-^íri;,,.. ‘-S-н.; ""н^'l ,■ ' JS
fe;
■ ■
/«S'i
i#' .if l
The framing and Une drawing function on your typewriter allows you
to draw horizontal and vertical lines, and to draw rectangular boxes
and tabular grids around text.
Note!
Framing only works in NORMAL or AUTO typing modes, not in the display typing modes.
Horizontal Line Drawing
To draw a horizontal line:
1. Position the carriage where you want the left-hand end of the line to be (A), You can
use [SPACE],[TAB], [BKSP], [CODE]+[BS 1], [CODE]+ [CODE]
+ [RETURN], [INDEX], [R INDEX], [CODE] + [INDEX], [CODE] + [R
INDEX], as required, to position it precisely.
2. Press the [FRAME] key. The message .¿iFRRMING will appear in the display,
3. Move the carriage to the point where you want the right-hand end of the line to be
(B), using [SPACE],[TAB], [BKSP], [CODE]+[BS I], [CODE]+ ,
[CODE] + —as required.
4. Press the [FRAME] key again.
The message: . d F R P h l N G j P R E S S R T N TO P R I N T will appear in the display.
5. Press the [RETURN] key and the line will be printed. The carriage will then return to
its original position.
[ F R A M E ]
= ( O P T I O N A L ) — ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ [ F R A M E ]
■----------------------------------- ■
A B