COMEUP Compact Winch (Ver:00) - Manual (Page 6)

I I . Handing Precautions
4
To prevent the risk of electric shock, the power plug must be plugged into a matching outlet and
grounded in good condition.
Never try to lift a load higher than the rated cap.
Never hitch a ride on the hook, sling or load being moving.
Winches are not to be used for lifting or lowering people.
Don’t work, walk or stand under an operating winch.
Always remain in control. Never neglect the winch while actually hosting a load.
While working, never stand under a lifting load or within the conveying area.
Always look up when working around winch, there is potential danger overhead.
Never gravitate a load free.
Be sure to lift a load vertically. Slack may allow wires to be caught in the drum.
A minimum of five (5) wraps of rope around the drum is carry out the daily checking necessary to
support the load rated.
Prior to starting of use, carry out the daily checking without fail, and after confirming the safety of
function.
If having a counter rotation incurred, make sure to correct its rotation direction.
Prior to lift. Make sure to have a precise performance of brake. If any malfunction of brake happened,
stop the operation immediately.
When load suspended in air, it will not allow to be welding.
Wire rope with one or more of the following defects shall be removed or replaced immediately.
1) kink, 2) distortion, 3) corrosion.
4) showing sings of excessive wear or of having broken wires not less than 10 pcs.
Stop the operation if there is any queer noise or vibration in the gear box to be happened.
Do not connect the wire rope with the grounding of welding machine.
While welding, do not have any contact with the welding objects because of having spark.
Do not pull the switch.
Never plugging (instant reverse-wind) or inching.
Do not over continuous ratings.
In order to prevent the layer down due to over loosening of rope irregular winding, etc., operate
according to the suitable operating method.
Use a winch by fixing so securely that the rope around the drum is uneven.
Be sure to fix a rope in the center of swivel hook.
Be sure to stop operation immediately when the wire rope becomes fully slackened.
Avoid catching the hook or lifting a load on a fixed obstruction.
Always leave the pendant switch positioned immediately after use.
Make sure that the load being lifting is well balanced and secured before starting.
Avoid water splashes on the pendant switch.
Never wrap the load with the wire rope.