Vertical Communications DX-80 - Manual (Page 15)

Page 12 P7292 DETUG 09/01
Operation – SDN
1. After you’ve placed an outside line call for which you want to store the
number, press
!51
.
2. The dialed number is stored in the Saved Number memory.
Operation – SNR
1. When the telephone is idle, press the feature button designated as
REDIAL (if available) or press
!51
.
2. The stored number is dialed.
Speed Dial Extension 470 – 489,
System 500 – 699
Speed Dialing allows you to store frequently dialed numbers. There are 20
speed “bins” for most extensions and 200 system speed bins that may be
shared by all extensions.
Operation – Setup
1. Press
!1
.
2. Dial the Speed Dial location number (
470
–
489
).
3. Press [show]. The current contents are displayed.
4. Press [chg].
5. Input the number you want to store, including Pauses (
!70
),
Flash
!3
and Pulse To Tone Conversion (
*
) codes.
6. Press [save]. That number is stored in this speed dial location.
7. Continue programming speed dial locations from step 2 above or
hang-up (press twice) to exit.
Operation – Use – System Selects the Outside Line Automatically
1. Dial the Speed Dial location number (
470
–
489
,
500
–
699
).
2. That speed dial number is dialed on the last outside line that you used
or any outside line in the same outside line group.
Operation – Use – You Select the Outside Line to Use
1. Press the desired outside line button (or dial the outside line directory
number 740-755).
2. Press
!1
.