Vertical Communications DX-80 - Manual (Page 8)

DX-80 Digital Executive Telephone User Guide Page 5
Making a Call
Outgoing Call (CO/Outside Line) 9,
Access to CO Lines (outside lines) is possible via several methods. In
some cases you may want to dial the specific outside line (lines
740
–
755
) or outside line group (
9
,
800
–
806
), but in
most cases, you can simply press the outside line button .
1. Press the outside line button of an idle outside line (LED not lit). If
the handset is still on-hook, the speakerphone LED will light.
2. When you hear dial tone, dial the telephone number.
3. Hang up to end the call. (Press if you are using speakerphone
to hang up.)
Intercom Call (to an extension) 101 – 156,
Dial the extension number. (Speakerphone activates automatically.) Lift the
handset for a private call.
Or…
Press the DSS button
of the extension that you want to call.
Account Code – Making a Call Using Account Code 79
If you want a call to be associated with a specific account in the detailed
records output from the DX-80 system (SMDR), you must enter an account
code prior to making the call. The account code length is predetermined
and programmed to be from 2 to 8 digits.
Operation
1. Dial the Account Code access number
79
.
2. Enter a valid account code. (The DX-80 system will automatically
access an idle outside line.)
3. Dial the telephone number.
Automatic Redial !78
You can use Automatic Redial (AR) to dial the last number you dialed. The
system will automatically dial the number and then wait for a predetermined
time for the call to be answered. If the call is not answered during this time,
the system will hang up and then try the call again. The number of
attempts the phone will make is designated in the system programming.