IC Realtime 4 Channel Forensic Network Video Recorder - Manual (Page 36)

27
c) On the PIP interface, click at the top left corner to select a channel you want
to display and then click to save. In mode 1, you can select 2/3/4 as the PIP mode.
Now you can see an interface shown as in Figure 4-19.You can use mouse to drag the PIP
picture to the proper position and drag mouse to zoom in or zoom out.
Figure 4-19
Note
z : The grey highlighted channel is the main channel. The white channel is the
PIP channel and black channel is the current selected channel.
z On the PIP mode, the volume bar is the mixed audio. For mode 1 to mode 4, system can
mix the audio of the main interface and the PIP interface. It is the audio of the PIP preview
and record audio.
4.1.8.2 4-window PIP mode
You can view 4-window on the PIP mode. You can follow the steps listed below.
a) From main menu->setting->general, check the navigation bar to enable navigation function.
Close general interface and then left click mouse on the preview interface, you can see an
interface shown as in Figure 4-20.
Figure 4-20
b) In Figure 4-20, click to set a mode and then click . Now system goes to 4-window
PIP mode.