IC Realtime 4 Channel Forensic Network Video Recorder - Manual (Page 38)

29
Figure 4-22
Tips
z
Click the REC/STOP at the front panel; you can go to burning interface. Click
REC/STOP for a short time, you can begin or pause burning. If you click REC/STOP for
a long time during the burning process, you can stop burning operation.
z On the left-click mouse menu, select main menu and then click Backup button. Click Burning
button, you can go to Figure 4-22 too.
b) Select a device from the dropdown list and then select a record channel.
c) Now you can set burn setup, mark setup and etc. Please note you can not set during the
burning process.
Click Settings button, you can see the following interface. See Figure 4-23 .
Here you can set interrogation time and resolution. Click Save button. System can calculate
the corresponding channel bit stream according to you input information and the CD space.
Figure 4-23
Click Burn setup, system pops up the following interface. See Figure 4-24.Please input
record password twice to confirm and check the corresponding box here to select information