C pairing with indoor monitor – IC Realtime Villa Outdoor Station (IHC6260) User Manual
Page 13
I C R E A L T I M E S E C U R I T Y S O L U T I O N S
3.c Pairing with Indoor Monitor
Note: This section mainly references how to sync the IHC-6260 with a indoor monitor to complete a
intercom setup. Note that this will reference your indoor monitor setup. Be sure the monitor is online
and ready to be used on the network. Please reference our other guides for a complete setup.
(click
on how-to notes and then 'Access Control')
First start with accessing the IHC-6260 as followed by the previous chapter instructions. You
should be greeted by a screen like below.
Click on the menu option of 'Indoor Station Manager'. This is where you will be adding your
indoor monitor so they are paired to each other. If you see a 'demo' monitor already added, click
the icon under 'delete' to rid of it.
Next, click on the 'add' button at the bottom of the table. Add in a name for the family/location
you are installing for (this is simply for organizational purposes). Add the short number of the
indoor monitor (see indoor monitor walkthrough for more detail). Finally, add the IP address of
the indoor onitor.
10